Yakima LockNLoad RuggedLine HD Installationsanleitung Seite 12

INSTALL THE FAIRING WITH ASSISTANCE FROM ANOTHER PERSON.
9
SECURE M6 X 16 MM SCREWS TO 4 NM USING THE SUPPLIED T30 TORX DRIVER.
!
NOTE: Vehicles equipped with a glass sunroof may not be suitable for fairing installation. The fairing
will reduce wind noise; however, opening the sunroof with the fairing installed may result in vehicle
damage. If you choose to not install the fairing, remove the fairing brackets from the RuggedLine HD.
M6 fairing clip
A
10
CHECK ALL RUGGEDLINE HD HARDWARE IS SECURE.
IF INSTALLING TRIMHD BARS, PROCEED TO PAGE 14.
21000326_8005200_RevB
x4 x4
IF INSTALLING LOCKNLOAD PLATFORM,
CONTINUE TO STEP 11.
C
M6 x 16 mm button head screw
M6 washer
T30
B
4 Nm
x4 x4
3 lb-ft
12/60