Yakima LockNLoad RuggedLine HD Installationsanleitung Seite 11

5
POSITION RUGGEDLINE HD ON VEHICLE ROOF.
!
NOTE: Check the
RuggedLine HD
hardware to be
sure the jog plates
are fully tightened.
If necessary,
tighten the jog
plate hardware
before placing
RuggedLine HD.
6 APPLY A SMALL AMOUNT
OF SUPPLIED ANTI-SEIZE
LUBRICANT TO EACH
M8 X 25 MM SCREW.
8
FULLY TIGHTEN EACH SCREW TO 7 NM USING THE SUPPLIED
T-HANDLE ALLEN KEY.
21000326_8005200_RevB
7
M8 x 25 mm button head screw
x12 x12
MANUALLY START SIX M8 X 25 MM
SCREWS WITH M8 WASHERS ON
EACH SIDE.
M8 washer
7 Nm
5.2 lb-ft
x12 x12
x12 x12
11/60