Inhaltsverzeichnis
Werbung
CHASSIS ELECTRICAL - Theft-alarm Svstem
With voltmeter
When using the MUT-II
TROUBLESHOOTING GUIDE
CHECKING THE INPUT
When using the scan tool (MUT) or voltmeter
1. Connect a voltmeter between terminal for ETACS and
terminal for ground, or connect the scan tool to the data
link connector.
When using the scan tool (MUT-II)
Connect the scan tool to the data link connector. When
connecting the scan tool to a vehicle up to 1993 models,
use the adapter harness supplied together.
Caution
Turn off the ignition switch beforehand whenever the
scan tool is connected or disconnected.
00002231
When using the voltmeter
1. Connect a voltmeter to the ETACS terminal
terminal of the data link connector using the special tool.
and
the ground
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
