Inhaltsverzeichnis
Werbung
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
Removal and Installation of Right Bank Warm Up
l
Three-Way Catalytic Converter
(Refer to GROUP 15-Exhaust Pipe, Main Muffler
and Catalytic Converter.)
24 Nm
Removal steps
1. Air hose E <Turbo>
2. Air hose C <Turbo>
l b
3. Suction
<Vehicles with air conditioning,
4. Drive belt
(Refer to GROUP 11 -
Engine Adjustment.)
ENGINE ELECTRICAL - Charging System
7-9 ft.lbs.
hose clamo nuts
REMOVAL SERVICE POINT
On vehicles with an air conditioning, remove the clamp
nut, raise the suction hose and suspend it from the engine
hood using a cord.
5. Generator connector
6. Heated oxygen sensor connector
7. Generator and generator bracket
assembly
8. Generator bracket
9. Generator
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
