Component Location - Mitsubishi MOTORS 3000GT Bedienungsanleitung

SPECIFICATIONS
GENERAL SPECIFICATIONS
Horn (Except for theft-alarm horn)
Theft-alarm horn
TROUBLESHOOTING

COMPONENT LOCATION

OPERATION
The horn switch always receives battery voltage
l
via the dedicated fuse (6) and the coil of the
h o r n r e l a y .
When the horn switch is set to ON, the contacts
l
of the horn relay close.
Then current flows through the dedicated fuse
(6) to the contacts of the horn relay, the horn
and ground, causing the horn to sound.
CHASSIS ELECTRICAL - Horn
TROUBLESHOOTING HINTS
1. One of the horn does not sound.
2. Horns do not sound.
NOTE
(1) For vehicles equipped with the theft-alarm sys-
(2) For information concerning the horn relay and
TSB Revision
I
Check the horn.
l
Check the horn switch.
l
Check the dedicated fuse (6).
l
tem, refer to P.54-205.
theft-alarm horn relay, refer to P.54-?18.