Mitsubishi MOTORS 3000GT Bedienungsanleitung Seite 609

CHASSIS ELECTRICAL - Column Switch
Front of vehicles
Mating mark-
! !k
PER REMOVAL
After the screws have been removed, remove the covers,
while making sure not to break the grippers.
INSTALLATION SERVICE POINT
To center the clock spring, line up the "NEUTRAL" mark
of the clock spring with the mating mark.
Caution
If the clock spring's mating mark is not properly
aligned, the steering wheel may not be completely
rotational during a turn, or the flat cable within the
clock spring may be severed, obstructing normal op-
eration of the SRS and possibly leading to serious
injury to the vehicle's driver.
INSPECTION
(1) Remove the knee protector and the column cover. (Refer
to GROUP 52A - Instrument Panel.)
(2) Disconnect the column switch left connector (16 terminals)
and check the continuity between the terminals for each
switch.
LIGHTING SWITCH CHECK
Operate the switch and check the continuity between the termi-
nals.
00002398
TSB Revision