Mitsubishi MOTORS 3000GT Bedienungsanleitung Seite 213

OPERATION
<Key-reminder warning>
Battery positive voltage is continuously applied to the key-reminder switch.
l
If the driver's door is opened (door switch ON) with the key inserted in the ignition switch (key-reminder
l
switch ON), the buzzer sounds to warn that the key has been left in the switch.
When the ignition switch is turned on, the timer circuit and pulse circuit will flicker the seat belt warning
l
light for approx. 6 seconds with the buzzer intermittently sounding.
l
stop.
TROUBLESHOOTING HINTS
Problem
The key-reminder The seat belt warning function
warning doesn't is OK.
sound.
The seat belt warning also
doesn't function.
The seat belt warn- The seat belt warning light
ing doesn't func- flashes.
tion.
The seat belt warning light
also does not function (and
the key-reminder warning
also does not function).
The buzzer doesn't stop even through the driver's
seat belt has been buckled.
The seat belt warning light doesn't flashes (but the
buzzer sounds).
The warning light does not flash and the warning
buzzer also does not sound.
The warning light flashes, but the warning buzzer
does not sound.
CIRCUIT DIAGRAMS
Check method
Check the door switch.
l
(Refer to GROUP 42-Door Assembly.)
Check the buzzer.
l
(Refer to GROUP 52A-Seat Belt.)
Check the seat belt switch.
l
(Refer to GROUP 52A-Seat Belt.)
Check the key-reminder switch.
l
(Refer to GROUP M-Ignition Switch.)
Check the seat belt switch.
l
(Refer to GROUP 52A-Seat Belt.)
Check the light bulb.
l
Check the key-reminder switch.
l
(Refer to GROUP 54-Ignition Switch.)
Check the seat belt switch.
l
(Refer to GROUP 52A-Seat Belt.)
Check the ignition switch input signal.
l
(Refer to GROUP 52A-Troubleshooting.)
Check the key-reminder switch.
l
(Refer to GROUP 54-Ignition Switch.)
Check the seat belt switch.
l
(Refer to GROUP 52A-Seat Belt.)
Check the key-reminder switch.
l
(Refer to GROUP M-Ignition Switch.)
Check the seat belt switch.
l
(Refer to GROUP 52A-Seat Belt.)
211