CHASSIS ELECTRICAL - Ignition Switch
INSPECTION
IGNITION SWITCH CHECK
(1) Remove the knee protector, the column cover lower and
the column cover upper. (Refer to GROUP 52A - Instru-
ment Panel.)
(2) Disconnect the wiring connector from the ignition switch
and key reminder switch, and connect an ohmmeter to
the switch side connector.
(3) Operate the switch, and check the continuity between
the terminals.
Position
LOCK
00002296
ACC
ON
START
TSB Revision
Connector A
Connector B
Connector
B
ignition
illumina-
tion light
terminal
No.