Mitsubishi MOTORS 3000GT Bedienungsanleitung Seite 39

CONFIGURATION DIAGRAMS
The wiring harness diagrams clearly show the connector locations and harness routings at each site on
actual vehicles.
Denotes connector No.
The same connector No. is used throughout the circuit dia-
grams to facilitate connector location searches. The first al-
phabetical symbol indicates the location site of the connector
and a number that follows in the unique number. Numbers are
assigned to parts in clockwise order on the diagram.
Denotes ground point.
Same ground number is used throughout cir-
cuit diagrams to facilitate search of ground
point. Refer to P.4 for details of ground points.
by a corrugated tube.
Number specific to connector (serial number)
Connector location site symbol
A: Engine compartment
B: Engine and transaxle
C: Dash panel
D: Instrument panel and floor console
E: Interior
F: Luggage compartment
A-02X
A-03X
A-04X
A-05X
A-06X
A-07X
A-08X
A-09X
A-02X ABS power relay
A-03X Fog light relay
A-04X Radiator fan motor relay(L0)
A-05X Taillight relay
A-06X Horn relay
A-07X Radiator fan motor relay (HI)
A-l OX Generator relay
ABS front speed sensor (RH)
A-12
A-13 ECS front shock absorber (RH)
A-14 Washer fluid level sensor
TSB Revision
A-18 ignition timing adjustment connector
A-l 9 Front washer motor
A-20 Evaporative emission purge solenoid
A-21 EGR solenoid
(Vehicles for California)
A-22 EGR temperature sensor
(Vehicles for California)
A-23 No connection <Turbo>
A-24 Brake fluid level sensor
A-25 ECS front shock absorber (LH)
A-26 Theft-alarm horn
A-27
Theft-alarm horn
A-28 Auto-cruise vacuum pump