(From 1996 models)
Disassembly steps
3. Rear bearing
4. Bearing retainer
5. Front bearing
6. Front bracket
7. Stator assembly
ENGINE ELECTRICAL - Charging System
DISASSEMBLY SERVICE POINT
(1)
(2) Insert plain screwdriver between front bracket and
8. Plate
9. Regulator and brush holder
10. Brush
11. Slinger
12. Rectifier assembly
13. Rear bracket
Remove the bolts.
Caution
Do not insert screwdriver too deep, as there is
danger of damage to stator coil.
13