Inhaltsverzeichnis
Werbung
CHASSIS ELECTRICAL
OIL PRESSURE GAUGE SIMPLE CHECK
Remove the oil pressure gauge unit
coupling connector.
Connect the harness connector via a
test light to the ground.
Place the ignition switch in the ON posi-
Check the test light and gauge conditions.
(1) Test light lights. (Pointer of gauge does not swing.)
VOLTAGE GAUGE SIMPLE CHECK
Check voltage gauge for conditions.
(1) Voltage indicated by voltmeter differs from voltage indicated by
voltage gauge (position indicated by pointer).
(2) Gauge does not operate.
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
