Mitsubishi MOTORS 3000GT Bedienungsanleitung Seite 530

CHASSIS ELECTRICAL - Meters and Gauges
INSPECTION
PRESSURE GAUGE CHECK <Turbo>
Measure resistance between terminals with circuit tester.
Standard value: Approx. 72 &2
VOLTAGE GAUGE CHECK <Non-Turbo>
Refer to P.54-30
OIL PRESSURE GAUGE CHECK
Measure resistance between terminals with circuit tester.
Standard value: Approx. 42 Q
ENGINE COOLANT TEMPERATURE GAUGE CHECK
(1) Remove the IG terminal scre\;/ from area A.
(2) Measure resistance between terminals with circuit tester.
Caution
For inspection, use a circuit tester which uses a mea-
surement current of 4 mA or less.
Standard value:
A - B
Approx. 51 Sz
A - C Approx. 139 Q
B - C Approx. 190 R