Reely SZD-54 Bedienungsanleitung Seite 59

Rudder function:
If the control stick for the rudder function is moved to the left, the rudder must deflect to the left. The rear rudder edge
must be deflected to the left by approx. 10 mm. In flight, the landing gear is pressed to the right and the model flies
to the left.
If the control stick for the rudder function is moved to the right, the rudder must deflect to the right. The rear rudder
edge must be deflected to the right by approx. 10 mm. In flight, the landing gear is pressed to the left and the model
flies to the right.
If the rudder does not deflect as described above, the "Servo-Reverse function" at the transmitter must be
used to change the running direction of the servos. Further information on this can be found in the operating
instructions for the remote control.
Figure 23
Figure 24
59