VEVOR RC-9002F Originalanleitung Seite 9

Olive-type
rotary drill
Spade
cutting drill
C-type
cutting drill
Arrow
Cutting Drill
Pipeline application scope
Diameter
of dredge
Rotary drill
spring
9.5mm 50-100mm
(3/8in)
12.7mm 50-100mm
(1/2in)
The RC-9002F, 9002G, and 9002J models can be used to unclog pipes of
corresponding sizes. If the pipe design, construction, and installation are
sound and the blockage is not severe, using them is effective and will not
damage the equipment. It is recommended that you use an endoscope to
determine the extent of the blockage before using the dredge . Dredges
cannot clear all blockages.
The most commonly used cleaning head, suitable for
pipes and drains with tight or multiple bends. Puncture or
drill through obstacles caused by textiles, paper, fiber
materials, kitchen grease, etc.
Suitable for removing oil stains and residues on pipe
walls
For cutting and removing tough obstacles or removing
sludge deposits
Used to clear blockages such as tree roots, branches,
debris or grease in pipes
Shovel
Olive
Cutting
drill
50-100mm
(2-4in) (2-4in)
50-100mm
(2-4in) (2-4in)
Type C
Cutting
Cutting drill
drill
50-100mm 100-200mm
(2-4in)
50-100mm 100-200mm
(2-4in)
- 8 -
Limit
torque
arrow
value of
dredge
spring
8N/M
(4-8in)
10N/M
(4-8in)