VEVOR RC-9002F Originalanleitung Seite 18

Follow the procedures in this manual to reduce the risk of injury from wire
rope twisting, breaking, whipping, machine tipping, chemical burns, or
other
It causes the harm.
1. Ensure that the work area and machine are set up correctly and no
unauthorized personnel are in the work area.
2. Pull the cable out of the drum and extend it into the pipe as far as you
can. Make sure at least 1 foot of cable is in the pipe.
This will prevent the wire rope from being thrown out of the pipe after
startup and causing whiplash injuries.
3. Correct operating posture:
• The foot switch should be operable and can be removed quickly. Do not
depress the foot completely.
• Make sure you maintain good balance.
• At least one hand should be able to manipulate the cable and feel its
movement.
• Can control CW /OFF/ CCW switch.
Figure 2
(The image is for reference only and may differ from the original appearance)
4. Put the switch CW /OFF/ CCW in CW position, do not step on the foot
switch. CW /OFF/ CCW only means
- 17 -