VEVOR RC-9002F Originalanleitung Seite 15

Figure 1
(The image is for reference only and may differ from the original appearance)
8. Make sure the rubber block at the bottom is in contact with the ground to
increase the stability of the machine.
9. There are no obstacles in the inspection work area and no unauthorized
personnel in the work area.
The operator will be disturbed by the personnel.
10. Choose the right dredging head. If you don't know the situation of the
blockage, choose an olive-shaped dredging head to judge the
Once you know the condition of the blockage, choose the appropriate
dredging head.
The blockage should be removed, and then the pipe should be completely
cleared with a large-sized dredging head. The largest size of the dredging
head should not exceed the inner diameter of the pipe minus
Remove the 1 inch value.
- 14 -