Safety Tips - Vevor Rc-9002F Originalanleitung

This symbol indicates a risk of electric shock.
This symbol indicates the risk of becoming entangled in belts and pulleys.

Safety Tips

warn!
Please read all safety precautions and instructions carefully. Failure to
follow these safety instructions may result in
could result in electric shock, fire, or serious personal injury.
Please keep these safety precautions and safety instructions in a safe
place.
Workplace Safety Considerations
1. Keep the workplace clean, tidy, and well-lit. A cluttered and dim
environment can easily lead to safety accidents. Prevent fires.
2.Do not operate power tools in flammable or explosive environments,
such as in the presence of flammable or explosive liquids, gases, or dust.
Power tools may generate sparks that may ignite these dusts or gases.
3. When operating the machine, keep irrelevant personnel (including
children, bystanders, non-workers, etc.) away from the work site. Irrelevant
interference will affect your correct use of the tool.
Electrical safety
• Grounded tools should be plugged into a properly grounded outlet. Never
change the plug or use any other adapters. If you suspect the outlet is not
grounded, have it checked by a qualified electrician. If an electrical fault
occurs, the grounding provides less resistance, allowing the current to flow
directly to the ground rather than through the operator.
• Avoid contact with grounded surfaces such as metal pipes, radiators,
metal cabinets, and refrigeration equipment. Contact with grounded
surfaces increases the risk of electric shock.
• Do not expose power tools to rain or moisture as this increases the risk of
electric shock.
• Do not damage the power cord at the power strip. Do not use the power
- 3 -