Breakdowns & Recommissioning; Decommissioning; Returning Goods - BWT Rondomat Rondomat RondomatDuo S Bedienungsanleitung

Decommissioning

Decommissioning
Decommissioning Decommissioning Decommissioning
Close Multib Close Multib Close Multibloc Close Multib Close Multib lock. k. k. k. k. The drinking water network is loc loc loc
supplied with untreated water via the bypass in
the Multiblock.
Press manual operation manual operation manual operation key manual operation manual operation
right-hand key right-hand key
Press right-hand key right-hand key right-hand key
Press Execute commissioning rinse Press Execute commissioning rinse Press Execute commissioning rinse Press Execute commissioning rinse Press Execute commissioning rinse
Press left-hand key eft-hand key for Commissioning, Rinse eft-hand key eft-hand key
eft-hand key
A rinse is carried out until the water has been
rinsed out to relieve the pressure.
Wait about 5 minutes until th Wait about 5 minutes until the Operating mode Wait about 5 minutes until th
Wait about 5 minutes until th Wait about 5 minutes until th
display appears.
Pull out the mains plug. Pull out the mains plug.
Pull out the mains plug. Pull out the mains plug. Pull out the mains plug.
Breakdowns Breakdowns Breakdowns & recommissioning Breakdowns Breakdowns & recommissioning & recommissioning & recommissioning & recommissioning
To avoid stagnation phases when the water-softening system is not in use the hygienic rinse function
may be used, in which after a set time has elapsed the system automatically performs a hygienic
rinse with freshwater without water throughput.
In the event of foreseeable stagnation phases In the event of foreseeable stagnation phases In the event of foreseeable stagnation phases In the event of foreseeable stagnation phases In the event of foreseeable stagnation phases
the following precautions should be taken: the following precautions should be taken: the following precautions should be taken: the following precautions should be taken: the following precautions should be taken:
Less than 3 days Less than 3 days Less than 3 days
Less than 3 days Less than 3 days
None
3 to 30 days 3 to 30 days 3 to 30 days
3 to 30 days 3 to 30 days
Close main isolation valve.
Disconnect water-softening system from
mains (close Multiblock).
1 to 6 months 1 to 6 months 1 to 6 months 1 to 6 months 1 to 6 months
Close main isolation valve.
Disconnect water-softening system from
mains (close Multiblock) and decommission.
Longer than 6 months Longer than 6 months Longer than 6 months Longer than 6 months Longer than 6 months
Disconnect domestic water installation from
public drinking water network.
Disconnect water-softening system from
mains (close Multiblock) and decommission.

Returning goods

Returning goods
Returning goods Returning goods Returning goods
At BWT, returned goods are dealt with exclusively
by using a retur n merchandise number. In
Germany, an RMA can be obtained by calling
06203 73 73.
BWT recommendation concerning BWT recommendation concerning BWT recommendation concerning BWT recommendation concerning BWT recommendation concerning
recommissioning after stagnation phases: recommissioning after stagnation phases:
recommissioning after stagnation phases: recommissioning after stagnation phases: recommissioning after stagnation phases:
Commissioning rinse of the water-softening
system. Then open all tapping points to wash
out the installation.
Open main isolation valve and Multiblock.
Regenerate both exchanger resin columns.
Then open all tapping points to wash out the
installation.
Open main isolation valve and Multiblock.
Have BWT Customer Service perform a
regeneration of both exchanger resin columns
using Dioxal disinfectant.
Then open all tapping points to wash out the
installation.
Restore connection to the public drinking
water network.
Have BWT Customer Service perform a
regeneration of both exchanger resin columns
using Dioxal disinfectant.
EN EN EN EN EN
69 69
69 69 69