BWT Rondomat Rondomat RondomatDuo S Bedienungsanleitung Seite 51

(lead No. 1, 2)
(lead No. 3, 4)
K1 K1
K1 K1 K1
K3 K3 K4 K4 K4 K4 K4
K3 K3 K3
Cable K1 and K2 Cable K1 and K2 Cable K1 and K2 Cable K1 and K2 Cable K1 and K2
Insert both of the black cables out of the technical
lids onto the control valve.
Cable K1
cable K3 cable K3 cable K3 cable K3 cable K3
(lead No. 5, 6)
Cable K3
Insert the red flat male tab (lead No. 1, 2) onto the
feed-in solenoid (polarity in any order)
Push the dual-pole plug (lead No. 3, 4) onto the
electrolytic cell.
K2 K2
K2 K2 K2
K1 K1 left; Cable K2 K1 K2 right. See red arrows. K2 K2
K1 K2
EN EN EN EN EN
51 51
51 51 51