BWT Rondomat Rondomat RondomatDuo S Bedienungsanleitung Seite 49

Mount the 4 external O-rings onto the connection
supports of the connection hoses (the rear groove
is for the fastening clip).
Should there be any damage during assembly,
there are extra O-rings.
Insert connection hoses in the left-hand
connection piece and secure with the fastening
clip. The fastening clip should be pushed in as far
as it will go.
Insert connection hoses in the right-hand
connection piece and secure with the fastening
clip. The fastening clip should be pushed in as far
as it will go.
Insert the flush water hose from the right-hand
control valve securely into the T-piece.
EN EN EN EN EN
49 49
49 49 49