Overflow channel 2
Overflow channel 2
Overflow channel 2
Overflow channel 2
Overflow channel 2
Service
Service
Service
Service
Service
P P P P P our in regener
our in regener
our in regener
our in regener
our in regenerants
Replenish regenerants at the latest when the sieve
tray (5 5 5 5 5 ) becomes visible or when the message
salt deficiency
salt deficiency
salt deficiency is displayed. Any commonly
salt deficiency
salt deficiency
available regenerative salts (salt tablets
complying with DIN EN 973 type A, e.g. Clarosal
or Sanisal/Sanitabs) may be used.
Open protective hood (2)
the storage chamber (3 3 3 3 3 ).
Press key until the salt deficiency
disappears.
After a salt deficiency the first two regenerations
are prolonged by 5 minutes.
The replenishment must be done in such a way
2 2 2 2 2
that no contaminants get into the storage chamber
(3 3 3 3 3 ) (clean regenerant packaging before use if
necessary).
3 3 3 3 3
I f c o n t a m i n a n t s a p p e a r i n t h e s t o r a g e
I f c o n t a m i n a n t s a p p e a r i n t h e s t o r a g e
I f c o n t a m i n a n t s a p p e a r i n t h e s t o r a g e
I f c o n t a m i n a n t s a p p e a r i n t h e s t o r a g e
I f c o n t a m i n a n t s a p p e a r i n t h e s t o r a g e
chamber (3) or brine chamber (6), the relevant
chamber (3) or brine chamber (6), the relevant
chamber (3) or brine chamber (6), the relevant
chamber (3) or brine chamber (6), the relevant
chamber (3) or brine chamber (6), the relevant
chamber m
chamber m
chamber must be cleaned with dr
chamber m
chamber m
6 6 6 6 6
Error messages
Error messages
Error messages
Error messages
Error messages
Overflow
Overflow
Overflow
Overflow
Overflow
If problems persist pull out the mains plug
If problems persist pull out the mains plug
If problems persist pull out the mains plug
If problems persist pull out the mains plug
If problems persist pull out the mains plug
and click the hand wheel on the Multiblock
and click the hand wheel on the Multiblock
and click the hand wheel on the Multiblock
and click the hand wheel on the Multiblock
and click the hand wheel on the Multiblock
Module shut (this opens the bypass to the
Module shut (this opens the bypass to the
Module shut (this opens the bypass to the
Module shut (this opens the bypass to the
Module shut (this opens the bypass to the
water supply).
water supply).
water supply).
water supply).
water supply).
Service
Service
Service
Service
Service
The S e r v i c e
S e r v i c e display appears after 500
S e r v i c e
S e r v i c e
S e r v i c e
regenerations or after 12 months.
The new count begins after 1 m
through the unit.
ants
ants
ants
ants
(2)
(2). Pour regenerants into
(2)
(2)
salt deficiency
salt deficiency display
salt deficiency
salt deficiency
ust be cleaned with dr
ust be cleaned with drinking w
ust be cleaned with dr
ust be cleaned with dr
Acknowledge error
Acknowledge error
Acknowledge error
Acknowledge error
Acknowledge error
If the error continues to be displayed,
If the error continues to be displayed,
If the error continues to be displayed,
If the error continues to be displayed,
If the error continues to be displayed,
call customer service.
call customer service.
call customer service.
call customer service.
call customer service.
EN
EN
EN
EN
EN
inking w
inking water
inking w
ater. . . . .
ater
ater
inking w
ater
3 t
has flowed
65
65
65
65
65