Warnings And General Precautions; Product Description - Nice Doubledimmer-Control Anweisungen Und Warnhinweise Zu Installation Und Gebrauch

1

WARNINGS AND GENERAL PRECAUTIONS

• Using this product for other purposes than those specified in this manual is strictly forbidden!
• All installation and connection operations must be performed exclusively by suitably qualified and skilled personnel with the
unit disconnected from the mains power supply.
• This manual contains important instructions and warnings for personal safety. Read all parts of this manual carefully. If in
doubt, suspend installation immediately and contact Nice Technical Assistance.
• The product packaging materials need to be disposed of in full compliance with local regulations.
• Never apply modifications to any part of the device. Operations other than those specified may cause malfunctions. The manufacturer de-
clines all liability for damage caused by makeshift modifications to the product.
• Never place the device near sources of heat or expose it to naked flames. These actions can damage the product and cause malfunctions.
• Don't use the product in damp or wet locations, near a bathtub, sink, shower, swimming pool, or anywhere else where water or moisture is present.
• This product isn't intended for use by people (including children) with reduced physical, sensory or mental capabilities or who lack experience
and knowledge, unless they are supervised by a person responsible for their safety.
• Make sure children don't play with the product.
• The device is designed to operate within an electrical home installation. Faulty connection or use can result in a fire or electric shock.
• Even when the device is turned off, voltage may be present at its terminals. Any maintenance introducing changes to the configuration of
connections or the loads must always be performed with a disconnected fuse.
2

PRODUCT DESCRIPTION

DoubleDimmer-Control is designed to manage two independent light loads, especially those based on LED technology. It's intended for instal-
lation in standard wall switch boxes. It can also be installed—according to its technical specifications—wherever it's necessary to control dim-
mable or non-dimmable lighting circuits.
DoubleDimmer-Control enables control of connected devices either through the Z-Wave
dimming two load circuits independently or in parallel.
The device monitors load power consumption, energy consumption, and mains voltage values. This data is sent to the hub through the Z-Wave
network.
2.1 - Main features of DoubleDimmer-Control
• Controlling two light circuits
• Compatible with any Z-Wave
• Supporting the protected mode (Z-Wave
• Supporting the SmartStart function
• Possessing advanced microprocessor control
• Sending notifications of load/grid issues
• Remembering the last set lighting level
• Enabling to set your favourite brightness level
• Enabling to set automatic switch-off time
• Working with momentary and toggle types of switches
• Installable in wall switch boxes of suitable dimensions in compliance with applicable regulations
• Measuring active power of the load, energy consumed and voltage of the mains
• Compatible with dimmable LED lights
2.2 - Full compatibility with Z-Wave Plus
This device can be used with all devices accredited with the Z-Wave
by other manufacturers. All non-battery operated devices within the network act as repeaters to increase reliability of the network.
The device is a Security Enabled Z-Wave
product.
2
® or Z-Wave Plus ® hub
network security mode) with AES-128 encryption
®
devices
®
Plus product and a Security Enabled Z-Wave
®
Plus network or a wall switch. It enables switching or
®
Plus certificate and is compatible with such devices produced
®
hub needs to be used to fully utilize the
®
®