Scheppach HL730 Original Bedienungsanleitung Seite 43

Characteristic noise emission values (400V~)
sound power level L
sound pressure level L
uncertainly K
WA/pA
* S6 40%, continuous operation periodic duty. Identical duty cycles
with a period at load followed by a period at no load. Running time 10
minutes; duty cycle is 40% of the running time.
Pressure:
The performance level of the built-in hydraulic pump can reach a short-
term pressure level for a splitting force of up to 7 tons. In the basic
setting, hydraulic splitters are set at the factory to an approx. 10% lower
output level. For safety reasons, the basic settings must not be changed
by the user.
Please note that external circumstances such as operating and ambi-
ent temperature, air pressure and moisture affect the viscosity of the
hydraulic oil. In addition, manufacturing tolerances and maintenance er-
rors can affect the reachable pressure level.
8. Unpacking
Open the packaging and remove the device carefully.
Remove the packaging material as well as the packaging and transport
bracing (if available).
Check that the delivery is complete.
Check the device and accessory parts for transport damage.
In case of complaints the dealer must be informed immediately. Subse-
quent complaints will not be accepted.
If possible, store the packaging until the warranty period has expired.
Read the operating manual to make yourself familiar with the device
prior to using it.
Only use original parts for accessories as well as for wearing and spare
parts. Spare parts are available from your specialized dealer.
98 dB (A)
WA
89,8 dB (A)
pA
3 dB
www.scheppach.com
GB | 43