Parkside Performance 458809 2401 Originalbetriebsanleitung Seite 31

centre. These safety measures
prevent accidentally starting the
power tool.
After releasing the on/off switch
(8) or pressing the direction of ro-
tation switch (4) in the centre po-
sition, the LED work light (10) re-
mains illuminated for approx. 10
seconds.
4. Remove the rechargeable battery
(6) from the device if you are leav-
ing the device unattended or if you
have finished working.
Drilling in hardwood
This is how you proceed when drilling
larger diameter holes in hardwood:
1. Pre-drill in 1st gear with a small
drill bit.
2. Extend to the desired drill diameter
with a larger drill bit.
Transport
Notes
• Turn off the device.
• Make sure that all moving parts
have come to a complete stop.
• Remove the rechargeable battery.
• Remove the attachment tool.
• Always carry the device by the
handle (7).
Cleaning,
maintenance and
storage
WARNING! Risk of injury due to
unintentional start-up. Protect your-
self when performing maintenance or
cleaning work. Switch off the device
and remove the battery (6).
You should have any repair and main-
tenance work that is not described in
these instructions carried out by our
Service Centre. Only use original re-
placement parts.
Cleaning
WARNING! Electric shock! Never
spray down the device with water.
NOTICE! Risk of damage. Chemic-
al substances may attack the plastic
parts of the machine. Do not use any
cleaning agents or solvents.
• Keep the ventilation slits, motor
housing and handles of the ma-
chine clean. Use a damp cloth or
brush to do this.
Maintenance
The device is maintenance free.
Storage
Always store the appliance and ac-
cessories:
• clean
• dry
• protected against dust
• In the provided storage bag (16)
• out of the reach of children
The storage temperature for the bat-
tery is between 0°C and 45°C. Avoid
extreme cold or heat during storage.
This would adversely affect battery
performance.
Remove the battery from the device
before storage over a longer period
(see separate operating instructions
for battery and charger).
Disposal/
environmental
protection
Remove the battery from the device
and recycle the device, battery,
accessories and packaging in an
environmentally-friendly manner.
GB MT
31