AsViva R7 Benutzerhandbuch Seite 55

CONSOLE
WATT (PROGRAMM 13)
1. Press the "ENTER" key to enter the setting mode.
2. At set state, the setting sequence is: time → distance → watt. Press the "+" or "-" key to adjust,
press the "ENTER" key to enter the next setting item,
3. Press the "START" key to start exercise. The resistance during exercise is automatically adjusted
according to the set watt value.
4. At exercise state, you can use the "UP" or "DWON" key to increase or decrease the incline. (Optio-
nal)
5. If any time, distance is set, at exercise state, this item is displayed as a countdown. When the
countdown reaches 0, the exercise will automatically stop with a „DI DI" sound prompt.
6. At exercise state, press the "START" key to stop the device from running
7. Notes: Watt value is determined by torque and rotating speed. In this program, the watt value will
remain constant. This means that if you pedal fast, the load resistance will decrease; if you pedal
slowly, the load resistance will increase to ensure that the watt value is constant.
55