Device Information; Adjustable Parameters; Factory Setting - Syr All-In-One+ Connect Anleitung Zur Montage, Inbetriebnahme, Bedienung Und Wartung

Device information

In addition to the system information such as serial number, fi rmware version or code number, information from the sensors for fl ow, pres-
sure and conductivity as well as meter readings of the fi lling process can be retrieved. Meter readings for instance indicate the duration
and volumes of the latest fi lling process and their total sums. It is also possible to retrieve information as to when the last refi ll had taken
place and what notifi cations are saved in the error log.

10.6. Adjustable parameters

The following table shows the adjustable parameters.
Parameter
Target pressure
Raw water hardness
Soft water hardness
Cartridge type
Cartridge size
Free cartridge size
Max. refi ll time
(depending on the installation size)
Max. fi lling cycles
Period for fi llings
Max. fi lling volume
Max. fi lling time
Capacity warning threshold
Initial fi lling
Manual fi lling
Range
0.5...5 bar
0...50°dH
0...9°dH
No cartridge, HWE, HVE, HVE Plus
2.5, 4, 7, 14, 30 litres,
free size
1...100 l
1 min - 12 h
1...10
Hourly, daily, weekly, monthly
Off, 10...9900 l
1 min - 12 h
1...100 %
Off, on
Off, on

Factory setting

1.5 bar
20 °dH
4 °dH
No cartridge
14 litres
100 litres
10, 30, 60 min
3
Weekly
30, 60, 120 min
10 %
Off
Off
27