syr All-in-One+ Connect Anleitung Zur Montage, Inbetriebnahme, Bedienung Und Wartung Seite 59

•
If necessary, check the conductivity of the water at the downstream draw-off valve
Click on "Weiter" (next) in the dialogue box still visible after venting the cartridge.
- The isolating valve closes.
Then click on "OK" to complete the operation.
Click on "Einstellungen" (settings) and enter the value for raw waterhardness - and
for HWE, set the value for soft water hardness.
Click on "Erstbefüllung" (initial fi lling).
Set the maximum fi lling quantity
Tip:
To indicate the fi lling time, the fi lling capacity of 0.5 m
considered for the fi lling volume!
Example:
max. fi lling volume: 500l - max. fi lling time: 1 hour.
max. fi lling volume: 1000l - max. fi lling time: 2 hours.
Assembly, commissioning, operation and maintenance
and duration .
All-in-One+ Connect
When fi lling the system with
fully demineralized water, set
the setting to "soft"!
)
(page 6, item
/h (0.3 m /h for 2.5l cartridge) must be
3 3
.