1.1. Notes on the operating instructions
With these operating instructions you can safely and effi ciently handle your SYR All-in-One Connect. They are included in the delivery and
must be kept and stored so that the user can access them anytime.
Due to technical developments, illustrations and descriptions in these operating instructions can still derogate from the All-in-One+ Con-
nect actually supplied.
We assume no liability for any damage caused by non-compliance with these operating instructions.
1.2. Symbols used
All safety instructions are signaled in the present operating instructions by respective symbols. The signal words at the beginning of the
safety instructions are an expression of the extent of the risk.
Danger!
The combination of the symbol and the signal word indicates direct danger and a situation which, if not avoided,
results in death or severe injury.
Warning!
This combination of the symbol and the signal word indicates a potentially dangerous situation which, if not avoided,
could result in death or severe injury.
Caution!
This combination of the symbol and the signal word indicates a potentially dangerous situation which, if not avoided,
could result in minor injury.
Attention!
This combination of the symbol and the signal word represents important information that helps prevent material or
environmental damage.
1.3. Copyright / Standards / Warranty
The present operating instructions and all the specifi cations supplied with the device remain intellectual property of Hans Sasserath GmbH
& Co. KG.
Their use in the framework of the use of the device is admissible and desired.
These documents must not be copied nor may they be made available to third parties, in particular competitors, without the express prior
consent of SYR.
The manufacturer's warranty is subject to the conditions of sale and delivery.
The warranty expires if:
•
the damage is due to improper operation,
•
repair or conversion work is performed by unauthorized persons,
•
non-original SYR accessories or non-original spare parts are used,
•
faulty parts are not repaired immediately in order to limit the extent of damage as far as possible and not to impair the safety of the
device (repair obligation).
1. General
3