Commissioning; Installing The Syr App; Accessing The All-In-One+ Connect Via App - Syr All-In-One+ Connect Anleitung Zur Montage, Inbetriebnahme, Bedienung Und Wartung

7. Commissioning

7.1. Installing the SYR App

The All-in-One+ Connect is controlled and operated via the SYR App. To install the SYR App, select option A or B.
A. Download the SYR App for free from the corresponding App Store and
install it on your smartphone or tablet.
B. Scan the QR Code.
7.2. Accessing the All-in-One+ Connect via App (remote control mode)
To set the All-in-One+ Connect via remote control mode, you only need a local connection,
no internet connection is required!
Start the App. Click on "SYR CONNECT" and then on "Fernbedienung CONNECT" (remote
control CONNECT) and scan the product-specifi c code.
The QR code and the code number of the All-in-One+ Connect are located on the casing
if you remove the left thermal insulation outer casing.
Activate the AccessPoint of the All-in-One+ Connect so that the SYR App can connect to
the device. To do so, press the button below the display for 10 seconds.
Once the connection is established, the SYR App wants to join the wireless network of the
All-in-One+ Connect.
Click on "Verbinden" (connect).
You may now access the All-in-One+ Connect via the App and adjust settings.
Assembly, commissioning, operation and maintenance
iOs
The installation of the SYR App is mandatory!
All-in-One+ Connect
Android
Button
..................
The AccessPoint deactivates
after 3 min. and has to be
reactivated, if required.