General Power Tool Safety Warnings - Parkside Performance Ppksa 40-Li B2 Originalbetriebsanleitung

Chain pitch
Number of driving elements
Graphical symbol on mounting
screw of sprocket cover
OPEN
CLOSE
Graphical symbol on chain brake
lever
Chain brake: OFF
Chain brake: ON
Chain brake (activated/
deactivated)
Symbol on screw for chain quick-
tensioning system
loosen
tighten
Graphic symbol on packaging
Dispose of the packaging ma-
terial properly.
Recycling symbol: Corrugated
cardboard
General Power Tool Safety
Warnings
WARNING! Read all safety warn-
ings, instructions, illustrations and
specifications provided with this
power tool. Failure to follow all in-
structions listed below may result in
electric shock, fire and/or serious in-
jury. Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings
refers to your mains-operated (cor-
ded) power tool or battery-operated
(cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable li-
quids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify the plug
in any way. Do not use any ad-
apter plugs with earthed (groun-
ded) power tools. Unmodified
plugs and matching outlets will re-
duce risk of electric shock.
b) Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and re-
frigerators. There is an increased
risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to
rain or wet conditions. Water en-
tering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never
use the cord for carrying, pulling
or unplugging the power tool.
Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or entangled cords in-
crease the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of
a cord suitable for outdoor use re-
duces the risk of electric shock.
GB MT
41