VEVOR RP8623S Bedienungsanleitung Seite 57

Problem
Spray gun stopped
spraying.
Paint runs down the wall
or sags.
Coverage is too thin or
sprayed paint is
inadequate.
Fan pattern varies
dramatically while
spraying.
OR
Sprayer does not
turn on promptly
when resuming
spraying.
Cause
Suction tube is leaking.
Nozzle Spray Tip is
clogged.
Coat is going on too thick.
Coat is going on too thin.
Pressure Control Knob is
worn and causing
excessive pressure
variation.
Tighten the suction tube connection. Inspect
the tube for cracks or vacuum leaks.
Unclog the Nozzle Spray Tip.
Move the gun faster.
Choose a Nozzle Spray Tip with a
smaller orifice.
Choose a Nozzle Spray Tip with a wider fan.
Ensure a sufficient distance (1-foot or 30cm)
from the gun to the painted surface.
Move the gun slower.
Choose a Nozzle Spray Tip with a larger
orifice.
Choose a Nozzle Spray Tip with a
narrower fan.
Ensure a sufficient distance (1-foot or 30cm)
from the gun to the painted surface.
Have the sprayer serviced by a qualified repair
person.
- 55 -
Solution