VEVOR RP8623S Bedienungsanleitung Seite 24

metal part of the spray gun firmly to the side of the pail to maintain ground
continuity of the gun and pail, then operate the trigger several times until pressure
within the hose has been relieved
6. Engage the trigger lock after pressure has been relieved.
7.Leave the Prime/Spray switch in the Prime position until you are ready to spray
again.
8. If you suspect the spray tip or hose is clogged or that pressure has not been
fully relieved after following these steps, CAREFULLY AND SLOWLY loosen the
tip guard retaining nut or hose end coupling to relieve pressure gradually, then
loosen completely before attempting to clear the any obstruction.
SETUP
Items in parenthesis () refer to the Feature identification drawing in the previous
section.
- 22 -