VEVOR RP8623S Bedienungsanleitung Seite 23

RISK OF SKIN INJECTION. DO NOT AIM THE GUN OR SPRAY AT ANY
PERSON OR ANIMAL. DO NOT PLACE IT IN FRONT OF SPRAY NOZZLE.
1. Place the ON/OFF Switch (B) into the OFF position and unplug the power cord.
2. Turn the Prime/Spray Switch to the PRIME position.
3.Adjust the Pressure Control Knob (D) to the lowest pressure setting (ROLL)
4.When using a waste or solvent pail, ensure the pail is metal and is properly
grounded. Clamp one end of a ground wire to the pail the other end to a proper
ground, such as a metal water pipe.
5.Point the spray gun into the grounded waste or solvent pail while holding any
- 21 -