VEVOR RP8623S Bedienungsanleitung Seite 31

Switch (B) to the OFF position.
8.Remove the Suction Tube (J) and Inlet Screen (K)from the pail that contains
water or flushing solvent(step 3) and insert into the container that holds the paint
you will be using.
9.Turn the ON /OFF Power Switch (B) ON.
10. Paint will begin to be pumped through the Suction Tube (J) and will begin to be
discharged through the Primer Output Tube (H) and into the waste /solvent pail.
11. Hold the spray gun pointing into and against the waste / solvent pail.
12. Unlock the trigger lock.
- 29 -