VEVOR RP8623S Bedienungsanleitung Seite 26

6. Install the Nozzle Spray Tip into the Nozzle Tip Guard.
7. Thread the Nozzle Tip Guard Retaining Nut onto the front of the upper spray
gun body and tighten with a wrench.
8. With the unit unplugged, uncoil and connect the High-Pressure Paint Hose (M)
to the Output Port(E). Use a wrench to correctly tighten the fitting.
9. Connect the other end of the High-Pressure Paint Hose (M) to the Gun Inlet
Port (V) on the spray gun Handle (T). Use a pair of wrenches to correctly tighten
the fitting
- 24 -