Cleaning; Maintenance; Care Of Circular Saw Blades; Storage - Parkside Performance Pphksa 40-Li A1 Originalbetriebsanleitung

GB MT
You should have any repair and main-
tenance work that is not described in
these instructions carried out by our
Service Centre. Only use original re-
placement parts.

Cleaning

WARNING! Electric shock! Never
spray down the device with water.
NOTICE! Risk of damage. Chemical
substances may attack the plastic
parts of the machine. Do not use any
cleaning agents or solvents.
• Keep the ventilation slits, motor
housing and handles of the ma-
chine clean. Use a damp cloth or
brush to do this.
• Try to clean resinous surfaces with
a damp, lukewarm cloth that has
been wrung out well. Make sure
that no liquids can get into the
interior of the housing! Alternat-
ively, you can use a special cleaner
(resin solvent) or multispray. Please
take notice of the safety informa-
tion and instructions provided by
the manufacturer of the special
cleaner/multispray.
• CAUTION! Personal injury!
Clean the protective hood of ac-
cumulated sawdust, otherwise
this could impair the function of
the protection system. It is best
to clean with compressed air. Use
suitable eye and respiratory pro-
tection.
Cleaning the circular saw blade
Tools must be cleaned regularly.
Tool parts made of light metal alloys,
e.g. resin, may only be cleaned with
solvents that do not impair the mech-
anical properties of these materials.

Maintenance

The device is maintenance free.
42

Care of circular saw blades

Maintenance work and modifications
to circular saw blades should only
be performed by a professional, i.e.
a person with specialist training and
experience who is familiar with the
design requirements and the neces-
sary safety steps.

Storage

Always store the device and ac-
cessories:
• clean
• dry
• protected against dust
• In the case provided (20)
• out of the reach of children
Devices with battery:
• The storage temperature for the
battery and device is between 0 °C
and 45 °C. Avoid extreme cold
or heat during storage to ensure
the battery output is not adversely
affected.
• Remove the battery from the
device before storage over a longer
period (see separate operating in-
structions for battery and charger).
Disposal/
environmental
protection
Remove the battery from the device
and recycle the device, battery,
accessories and packaging in an
environmentally-friendly manner.
Waste electrical and electronic
equipment (WEEE) must not
be disposed of with domestic
waste.
The symbol of the crossed-out
wheeled bin means that this product
must not be disposed of as unsorted