Description Of Functions; Technical Data - Parkside Performance Pphksa 40-Li A1 Originalbetriebsanleitung

33 Speed button
34 Overload indicator
35 Button (Charge level indicator
on the device)
36 Charger
37 Battery release
38 Battery
39 Charge level indicator
40 Button (Charge level indicator)
41 Groove
42 Adjusting knob
(Fig. A)
43 Mounting flange
(Fig. C)
44 Guide notch (0°; 45°)
45 LED work light

Description of functions

In a circular saw, a circular saw blade
cuts by rotating. The cutting depth
and cutting angle are adjustable.
Please refer to the descriptions below
for information on how the operating
elements work.

Technical data

Cordless Circular Saw
...............................PPHKSA 40-Li A1
Rated voltage U ........ 40 V (2×20 V) ⎓
Weight with battery (20 V / 4 Ah)
.................................................≈5.4 kg
No-load rotation speed n
Cutting depth
– 0° ....................................... 62.5 mm
– 45° ..................................... 46.8 mm
– 48° ..................................... 44.1 mm
Bevel cutting ............................0°–48°
Temperature ............................ ≤50 °C
– Charging ............................. 4–40 °C
– Operation ........................−20–50 °C
– Storage ............................... 0–45 °C
PARKSIDE Performance Smart
battery Smart PAPS 204 A1/
Smart PAPS 208 A1/
Smart PAPS 2012 A1
– frequency band .. 2400–2483.5 MHz
– transmitted power ............≤ 20 dBm
Sound pressure level (L
...............................91.7 dB; K
Sound power level (L
– Measured .......... 99.7 dB; K
Vibration (a
– Handle ........ 0.895 m/s²; K=1.5 m/s²
– Auxiliary handle
....................... 0.877 m/s²; K=1.5 m/s²
Saw blade .......................... PSB 24 Z
Manufactured in compliance with EN
847-1:2017
Cutting circle ..................... ⌀ 190 mm
Cutting width ........................1.45 mm
Main blade thickness ............. 1.0 mm
Borehole .............................. ⌀ 30 mm
Maximum speed ............... 8040 min
Number of teeth ............................. 24
The saw blade is suitable for the fol-
lowing materials: wood
Levels of noise and vibration were de-
termined according to the standards
and regulations in the declaration of
conformity.
The specified total vibration value and
the stated noise emission value have
been measured according to a stand-
ardised test method and can be used
. 6000 min⁻¹
to compare one power tool with an-
0
other. The specified total vibration
value and the stated specified noise
emission value can also be used for a
provisional assessment of the load.
noise emissions may deviate from
the specified values during actual
use of the power tool, depending on
how the power tool is being used. Try
)
h
WARNING! The vibration and
GB MT
)
pA
=3 dB
pA
)
WA
=3 dB
WA
−1
29