Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation, Setting and Use
4.3 Operation and setting
Notes on commissioning:
• After connecting the oven to the power supply,
the time setting is reset.
Set it as described in the following section.
• When using the oven for the first time,
first heat it up with an empty cooking chamber,
as described under "Commissioning".
Setting the clock
Before the oven is put into operation, the time should be set.
To do this, proceed as follows:
• After connecting the oven, touch the
to activate the time setting (initially hour digits).
• Use the slider or the
of the current time.
Note:
The time is set and displayed in 24-hour counting.
• Touch the
key again and set the current number
of minutes in the same way..
• Confirm the setting with the
Setting the heating mode and temperature
• Touch the
key repeatedly until the symbol for your
desired heating mode appears on the display.
• Use the slider or the
cooking temperature.
• Start the heating process with the
Note: If the key is not touched, the appliance switches
to standby after 5 minutes (display of the clock).
Pausing and cancelling heating operation
• To pause the heating process, touch the
Then touch the
• To cancel / end the heating process, touch the
36
and
keys to set the number of hours
key.
and
keys to set the desired
key again to continue.
key
key.
key.
key.
Werbung
