Werbung
Verfügbare Sprachen
Verfügbare Sprachen
How works
One Step Power Release & Share
Power all of your lawn & garden equipment, DIY tools and lifestyle accessories with the same
battery. Each battery uses a management system that monitors and optimizes individual Li-Ion
cells to maximize power, performance and run time.
Automatic multi-zone cutting
Mower automatically divides the garden into multiple work areas according to the length of
the boundary line. And every time mower starts working from the charging station, will cut from
different positions and orientations of the border to ensure the uniformity of lawn.
Charges itself
When your mower needs to recharge, it will stop mowing and follow the boundary wire in an
anti-clockwise direction back to its charging station. Once charging is complete, mower will
automatically resume mowing or stay in the charging station according to its mowing schedule.
Rain sensor
Mower is 100% weather proof and happy to be outside. But mowing wet grass does not give you
the best finish or result. Mower is equipped with a rain sensor which detects rain and tells mower
to stop mowing and go back to its charging station.
Rain delay time
After a rainfall, the mower restarts when the grass is no longer wet. The default rain delay time is
30 minutes. You can change the rain delay time setting via OSOTEK App. See detailed instructions
at the end of this manual.
In more extreme weather...
In case of a lightning storm, protect the mower by unplugging the charging station, disconnecting
the boundary wire, and making sure the mower is not allowed to charge. In the winter and
especially in case of very cold weather and snow, we recommend you store your mower inside.
Cutting Height
Mower's cutting height can be adjusted between 20mm-60mm at 10mm steps. Before starting
your mower for the first time, make sure your grass is no longer than 10cm. If longer, use a regular
mower to cut it. If you want to drastically shorten the height of your grass, it is recommended that
you do so progressively, by adjusting the cutting height in steps.
10
Werbung
