OSOTEK Linear 101 Benutzerhandbuch Seite 10

• Place mower on charge by making sure a good contact is established with the charging station.
The LED will blink green; once the battery is fully charged, the LED will turn solid green.
click
Note: Let mower charge the battery for a while. While it is charging you may want to take a well-
deserved break: get familiar with the following instructions, and connect mower to your Wi-Fi
network (option).
Screen
Mower's control panel provides the key functions in a minimalistic design.
For advanced functions, the free OSOTEK app provides further options in a richer interface: your
smartphone.
Bluetooth signal indicator
Wi-Fi signal indicator
Schedule status
Power: On/Off
START: Start mowing/
input PIN
Start Mower
• Place mower inside the charging station.
• Press the On/Off button until the screen displays 'IdLE'.
• The display flashes to prompt you to input of PIN.
• Input the default PIN 0000 by pressing the OK button four times.
• If the wrong default PIN is inputted, the screen displays 'ERR'.
• Press the START button, then press OK. Then you will hear a "beep" from mower.
• After 5 seconds, mowing deck starts to rotate, you will hear a "beep". The mower will start
mowing.
• You can stop mower at any time by pressing the STOP button.
• To send mower to the charging station, press the HOME key, then press OK.
Change PIN
• To make your mower safer and more secure, change the default 0000 PIN to aPIN of your choice.
• Turn mower on, pressing the START button and HOME button for 3 seconds.
• Input the default PIN 0000, then screen dispalys 'PIN2'.
• Compose your new PIN using the ↑ and ↓ button. Then press OK to proceed to the next.
• Press OK to complete the setup. Then the screen displays 'IdLE'.
Important
• Write down the PIN and keep it in a safe place.
• Please note that in case you lose your PIN, you will not be able to operate mower.
• If you decide to sell your mower in the future, please restore the factory default 0000 PIN before
delivering it to the new owner, or give your personalized PIN to the new owner.
• If you are delivering your mower to a service center, please let them know your PIN.
Set Time
• Pressing the START button and OK button at the same time for 3 seconds.
• Then the current year flashes on the display.
• Use the ↑ and ↓ button to select the desired year. Then press OK to proceed to the next.
• Then the current date flashes on the display.
• Use the ↑ and ↓ button to select the desired date. Then press OK to proceed to the next.
• Then the current time flashes on the display.
• Use the ↑ and ↓ button to select the desired time. Then press OK to proceed to the next.
Lock status
• Then press OK to complete the setup. Then the screen displays 'IdLE'.
Set Work Time
Battery status
• Turn mower on, pressing the HOME button and OK button for 3 seconds.
• Then the current working hours flash on the display.
• Use the ↑ and ↓ button to select the desired working hours. Then press OK to proceed to the next.
• Press OK to complete the setup. Then the screen displays 'IdLE'.
Set Start Time
OK: Confirm selected
• Turn mower on, press the START button for 5 seconds, the default start time flashes on the
choice/settings
display.
HOME: Send mower
• Use the ↑ and ↓ button to select the desired time. Then press OK to proceed to the next.
• Press OK to complete the setup. Then the screen displays 'IdLE'.
to charging station/input
PIN
9