Ego Power+ RM2000E Übersetzung Der Originalanleitung Seite 20

EN
LCD Screen
Exit error
Left drive motor error
Right drive motor error
Mowing motor error
Height adjustment motor
error
Imbalanced cutting system
Area setting issue
Robot lifted
Robot tilted
Robot turned over
Robot collision
PIN incorrect (already have)
Robot stolen
20
ROBOTIC MOWER — RM4000E
Action
1. Remove any obstacles around the charging station.
2. Clean base board of the station and wheels on robot.
1. Turn off the Robot.
2. Check drive wheels, remove any obstruction.
3. Let robot cool and restart.
1. Turn off the Robot.
2. Check drive wheels, remove any obstruction.
3. Let robot cool and restart.
1. Turn off the Robot
2. Check cutting disc, remove grass or other obstruction.
3. Let robot cool and restart.
TIP: If grass is long, increase cutting height, and reduce over time.
1. Turn off the Robot.
2. Check cutting disc and chassis, remove any obstruction.
3. Let robot cool and restart.
1. Turn off the Robot.
2. Check cutting disc and blades for damage or obstruction.
3. Replace missing or damaged blades as per user instructions.
Check whether the area setting is consistent with the actual situation.
Place robot in work area.
Place robot in work area.
Check max slope in work area does not exceed machine capability as stated in installation instructions.
Place robot in work area.
Check max slope in work area does not exceed machine capability as stated in installation instructions.
Collision: Check work area for unexpected obstruction.
PIN incorrect.
Retrieve password using APP or contact local dealer.
Distance between robot and station is off limit.
Check if it is stolen.