Ego Power+ RM2000E Übersetzung Der Originalanleitung Seite 16

10.9.2 Headlight setting
EN
10.9.2.1 To set the schedule for the headlight
Do steps 1-2 in 10.9.1 Rain sensor setting to enter the 1
1.
of the others setting.
2. Tap to enter HEADLIGHT SETTING .
3. Tap to enter LIGHT SCHEDULE . Select between Always
ON, Always OFF or Set Time Period .
4. When selecting Set Time Period , you can set detailed time
period and tap to confirm.
10.9.2.2 To set color mode setting
Do steps 1-2 in 10.9.2.1 To set the schedule for the headlight to
1.
enter the headlight setting.
2. Tap to enter COLOR MODE SETTING .
3. Tap and activate Flashes when fault alert , and select Light Color .
4. Tap to confirm.
10.9.3 SMS setting
The SMS function sends you an SMS when the product is moved out of
the GeoFence.
Do steps 1-2 in 10.9.1 Rain sensor setting to enter the 2
1.
of the others setting.
2. Tap to enter SMS SETTING .
3. Tap Use SMS and ADD+ to set your phone number with country
code, for example +49 172 12345678, Tap
10.9.4 Bluetooth pairing
®
EGO Connect TM app is always connected to your product as long as the
mobile device has connection with the mobile network, the product is
charged and the LCD screen is turned ON and the product has been
previously paired with your account.
To pair EGO Connect and the product
TM
1. Do steps 1-2 in 10.9.1 Rain sensor setting to enter the 2
of the others setting.
to enter BLUETOOTH PAIRING .
2. Tap
3. Follow the instructions in EGO Connect
NOTICE: The LED Status Indicator on the product will flash blue during
pairing.
The LED Status Indicator on the product will glow solid blue when the
product is connected to your mobile device via Bluetooth
10.10 General
In GENERAL you can change the general settings of the product.
10.10.1 To set language
Do steps 1-3 in 10.1 To get access to the main menu .
1.
2. Tap to enter the 1
3. Tap to enter LANGUAGE setting.
4. Tap or to select language and tap
16
ROBOTIC MOWER — RM4000E
st page
nd page
to confirm.
nd page
to "add tool".
TM
.
®
st page of the general setting.
to confirm.
10.10.2 To set country & time zone
1. Do steps 1-2 in 10.10.1 To set language .
2. Tap to enter COUNTRY & TIME ZONE setting .
3. Tap or to select COUNTRY & TIME ZONE and tap the
to confirm.
10.10.3 To set unit format
1. Do steps 1-3 in 10.1To get access to the main menu .
2. Tap to enter the 1 page of the general setting, then tap
st
to enter the 2 page.
nd
3. Tap to set UNIT FORMAT and tap
10.10.4 To set touch-tone
The robot will beep when clicking on the screen after enabling touch-
tone ON.
Do steps 1-2 in 10.10.3 To set unit format to enter the 2
1.
of the general setting.
2. Tap to enter TOUCH-TONE setting.
3. Activate the touch-tone and tap the
10.10.5 The About menu
The ABOUT menu displays information about the product.
1. Do steps 1-3 in 10.1 To get access to the main menu .
2. Tap to enter the 1 page of the general setting, then tap
st
twice to enter the 3 rd page of the general setting.
to display ABOUT menu information.
3. Tap
10.10.6 To reset user setting
1. Do steps 1-2 in 10.10.5 The About menu to enter the 3
the general setting.
2. Tap to enter RESET USER SETTINGS .
3. Tap to confirm.
4. Enter PIN Code to reset settings.
10.10.7 To update firmware
1. Do steps 1-3 in 10.1 To get access to the main menu .
2. Tap to enter the 1 page of the general setting, then tap
st
thrice to enter the 4 page of the general setting.
th
3. Tap to enter FIRMWARE UPDATE .
4. Follow on screen instruction to update firmware version.
NOTE: Firmware update can be updated from EGO Connect
be prompted when update becomes available.
OPERATION
WARNING: Read the safety instructions carefully before you start
the product.
WARNING: Keep your hands and feet away from the rotating
blades. Never put your hands or feet close to or under the product when
the motor is running.
to confirm.
page
nd
to confirm.
page of
rd
You will
TM.