Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
CAUTION: Do not use a high-pressure washer or running water to
clean the charging station.
NOTE: The product cannot enter the charging station if there are objects
in the charging station. Clean the charging station regularly.
◾
Remove grass, twigs and other objects from the charging station.
Replace the blades
WARNING: You must replace the screws when you replace the
blades. The used screws can wear quickly and make the blades come
loose, this can cause serious injury.
Replace worn or damaged blades for a safe operation. Replace the
blades regularly for a satisfactory cut result and a low energy use.
All 3 blades and screws must be replaced at the same time to get a
balanced cutting system.
To replace the blades (Fig. T)
1.
Push the STOP button.
2.
Switch OFF the product.
3.
Turn the product upside down. Put the product on a soft and
clean surface to avoid scratching the product.
4.
Rotate the skid plate so that its holes align with the screws for
the blade.
5.
Remove the 3 screws with a flat-head or Philips screwdriver not
included.
6.
Remove the 3 blades.
7.
Attach 3 new blades and screws.
8.
Make sure that the blades can pivot freely.
Battery
CAUTION: Charge the battery fully before you put the product into
storage. If the battery is not fully charged it can cause damage to the
battery.
If the operating time of the product is shorter than usual between
charges, this means that the battery is at the end of its life cycle.
Replace the battery to extend the operating time.
NOTE: The battery life is related to the length of the season and how
many hours a day the product operates. A long season or many hours
of operation a day means that the battery must be replaced more
regularly. Take your product to your EGO center service for battery
replacement.
18
ROBOTIC MOWER — RM4000E
TRANSPORTING AND STORING
◾
Fully charge the product.
◾
Switch off the product.
◾
Clean the product.
◾
Keep the product in a dry, frost free space indoors in winter.
◾
Keep the product with all wheels on level ground during storage.
◾
If you keep the charging station indoors, disconnect and remove
the power supply and all the connectors from the charging
station. Put the end of each connector wire in a connector
protection box.
How to lift and move the product (Fig. U)
WARNING: The product must be switched off before lifting it.
CAUTION: Do not lift the product when it is parked in the charging
station. It can damage the charging station and/or the product. Push
the STOP button and pull the product out of the charging station before
lifting it.
To safely move from or within the work area:
Push the STOP button to stop the product.
1.
Press the POWER button for 2 seconds to switch OFF the
2.
product.
3.
Carry the product by the carry handle with the blade disc away
from the body.
PROTECTING THE ENVIRONMENT
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information regarding
the collection systems available.
If electrical appliances are disposed of in landfills
or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your
health and well-being.
Werbung
