Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10.3 Schedule Setting
EN
10.3.1 To calculate the schedule setting
NOTE: The operation capacity is estimated based on flat and open area.
You need to increase the time scheduled if the work area has lots of
slopes or obstacles.
NOTE: The operating hours includes mowing, searching and charging
time.
1.
Calculate the area of your lawn in m2.
2.
Divide the lawn area by the product area capacity, the result is
the hours that the product must operate each day.
Example: A lawn of 2000 m
, area capacity of 167 m
2
2000 m
2
/ 167 ≈ 12 h
Days /week
Operating hours/day
7
12
10.3.2 To set the schedule
Do steps 1-3 in 10.1 To get access to the main menu .
1.
to enter SCHEDULE setting
2.
Tap
to enter WEEKLY OVERVIEW .
3.
Tap
4.
Tap + to enter SET TIME .
5.
Select the suitable operating hours.
6.
Tap
or
to select the day, and tap
SEGMENT . The product can cut the grass 1-3 segments each
day.
7.
Tap
to enter the time period setting and tap
10.3.3 To copy the schedule setting
1.
Repeat the step 1-4 in 10.3.2 To set the schedule .
2.
Tap
to copy the schedule setting. You can copy the schedule
settings day to day or for the full week.
3.
Tap
to confirm.
10.3.4 To reset the schedule setting
You can remove all schedule settings and use the factory setting. The
factory schedule setting lets the product operate all hours of each day
of the week.
1.
Repeat the step 1-4 in 10.3.2 To set the schedule .
2.
Tap
to reset the schedule settings and back to the factory
setting.
10.3.5 To override schedule
Any schedule settings can be temporarily overridden by selecting the
override schedule. It is possible to override the schedule by selecting
between 24 hours, 48 hours and 72 hours.
1.
Repeat the step 1-2 in 10.3.2 To set the schedule .
2.
Tap
to enter OVERRIDE SCHEDULE .
3.
Tap the desired hours and tap
14
ROBOTIC MOWER — RM4000E
To cancel the override schedule
1.
2.
10. 4 Cutting Height Setting
The cutting height can be varied from 20-90 mm of 1-15 positions.
1.
2.
3.
10. 5 Operation Mode Setting
/h
2
10.5.1 To select the work area
1.
Time Period
2.
07:00 am – 7:00 pm
3.
Main area: Main area is the standard operating mode where the
product mows and charges automatically. The default work area is main
area.
Secondary area: Use Secondary area operating mode to cut secondary
areas. You must move the product manually between the main area and
to enter DAILY
the secondary area. The product cuts for a selected period of time or
until the battery is empty.
NOTE: You must put the product manually in the charging station to
to confirm.
charge the product when it is in a secondary area. The product will stay
in the charging station when the battery is charged. You must select the
main work area to restart the product.
10.5.2 Spiral cutting mode
The product cuts the grass in a spiral mode if the grass is longer in
an area. Spiral cutting can be set in 5 levels of 1-5. Spiral cutting will
trigger more frequently in setting levels.
1.
2.
3.
4.
5.
10.5.3 Edge cutting mode
The product will start cutting along the boundary wire of the lawn in
every new cycle when in the edge cutting mode.
1.
2.
3.
to confirm.
4.
Tap
to enter OVERRIDE SCHEDULE .
Tap the selected hours and tap
Do steps 1-3 in 10.1 To get access to the main menu.
Tap
to enter CUTTING HEIGHT SETTING .
Tap
or
to set the cutting height and tap
Do steps 1-3 in 10.1 To get access to the main menu.
Tap
to enter the 1
page of the cutting mode setting
st
(tap
to enter the 2
page).
nd
Tap
on the 1
page to select the work area and tap
st
confirm.
Do steps 1-3 in 10.1 To get access to the main menu .
Tap
to enter the 1
page of the cutting mode setting.
st
to set SPIRAL CUTTING mode.
Tap
Activate the spiral cutting mode, tap
sensitivity level.
Tap
to confirm.
Do steps 1-3 in 10.1 To get access to the main menu .
Tap
to enter the 2
nd
page of the cutting mode setting.
to enter EDGE CUTTING mode.
Tap
Activate the cutting mode and tap
to confirm.
to confirm.
to
or
to select the
to confirm.
Werbung
