Threading The Machine - Singer 7146 Gebrauchsanweisung

5
6
Threading the machine
Raise the presser
discs and make sure
lever are in highest position.
• Place spool pin felt
spool pin, and place
spool pin with slit A on top.
Keep right hand on spool of thread
firmly in place while
• Snap thread into upper thread
• Pass thread through
1
foot to release tension
needle and take-up
from accessories over
spool of thread on
to hold
threading machine.
guide 1.
point 2.
2
Thread the needle
thread over metal
Lead thread under
through tension wire by firmly pulling thread
straight up.
Pull thread to right
thread up toward take-up
Pass thread through
Thread needle from
about 10 cm (4 inches) of thread through eye
of needle.
3
thread tension 3. Slide
p/ate into tension discs.
needle thread tension and
behind point 2 guiding
lever.
points 4 to 6 as shown.
front to back and draw
23