Singer 7146 Gebrauchsanweisung Seite 48

ADJUSTING
When you are preparing
ing, make a test sample
thread you plan to use so that you can adjust
the stitch length
Any stitch length setting from 1 to 4 will give
you an open
corative stitch pattern you select. The higher
the number, the more open, or farther apart,
your stitch will
of lhe selector is used for the fine adjust-
ment of satin stitching (page 34).
For stretch
controlled with
length selector.
loured bar
the dial.
ADJUSTING
When you are using stretch
you may need to adjust the stitth
in order to
stitch.
Before you move the dial from its neutral po-
sition (
<
on panel), make a test sample.
ment is required
B
dial as illustrated.
• Turn dial down to bring stitches
terns together
• Turn dial up to separate stitches of the pat-
terns (ill. B).
Always return the dial to its neutral
after sewing
STITCH LENGTH
to do pattern stitch-
with the
correctly.
stitch pattern of whichever
be. The area between
stitch patterns, stitch
a single setting of the stitch
Simply rotate it until the co-
is under the V symbol above
STITCH BALANCE
stitch
balance
correct the appearance
symbol on dial aligned
stitch slowly and
(ill. A).
stretch stitch patterns.
fabric and
de-
0 and 1
length is
patterns,
dial
of the
with line
If adjust-
move the
of the pat-
position
47