Zipper Insertion - Singer 7146 Gebrauchsanweisung

6)
ZIPPER INSERTION
Needle PoSition: :
Stitch Width:
Stitch Length: To suit fabric
General Purpose Needle Plate
Zipper Foot
Adjusting the Zipper Foot
When the zipper is to the right of the needle.
• Before attaching the zipper
adjusting spacer to the left (illustration A).
• Snap on the zipper
page 9.
• Check the position of the foot by lowering
the needle into the side notch
making sure it clears
When zipper is to the left of the needle, adjust
the foot to the right of the needle in the same
way (illustration B).
Applications with zig-zag stitching
APPLIQUÉ
Pattern Group Selector:'
Needle Position: : X
Stitch Width: To suit fabric
Stitch Length: Between
General Purpose Needle Plate
Special Purpose Foot
Trim outside fabric edges close to straight
stitch outline of design.
Set machine as code recommends.
Overedge the design with applique stitching.
This step will produce
finish that requires no additional trimming.
foot slide the
foot as instructed on
of the foot,
the foot.
O and 1
a smooth, lustrous
39