Singer 7146 Gebrauchsanweisung Seite 64

1
2
3
Buttons
• Pattern Group Selector: /
• NeedlePosition: L.
Stitch Width: To suit button
Stitch Length: O
Needle Plate Raising Shim (with model 7186)
Snap-in Feed Cover (with model 7146)
General Purpose Foot
ATTACHING
Flat buttons can be sewn on by machine using
the zig-zag stitch.
• Insert needle plate
structed on page.
Cover with 7146 Model).
Set stitch width selector
1.
Set needle position
Place button positioned
foot and lower needle
hole.
Lower presser foot.
Turn hand wheel
needle rises out
just above the presser foot.
Set stitch width selector
2.
zig-zag setting.
• Continue turning
needle is above right hole, adjust
width, as necessary,
the centre of the right hole.
Take six or more zig-zag stitches and fin-
iSh with the needle on the left.
Move stitch width
3.
few stitches to fasten
• Pull thread ends through
ment knot close
loose ends of thread.
A BUTTON
raising shim as in-
11 (Snap-in Feed
at
at left
on fabric under
into centre of left
toward you until the
of button hole and is
to a medium width
hand wheel until the
stitch
until needle enters
selector to : and take
threads.
to back of gar-
to fabric and snip off
63
a