Instructions For Replacing The Battery; Warm-Up - Merach Mr-R28 Benutzerhandbuch

INSTRUCTIONS FOR REPLACING THE BATTERY

INSTRUCTIONS FOR REPLACING
THE BATTERY
PLEASE NOTE: The device is equipped with 2 trial AAA batteries that have passed
MSDS certification. These batteries may not provide the same life as standard batteries.
In order to ensure a functioning, please replace them in time.
Step 1:
On the back of the monitor, find the position shown
on the right, press the battery cover buckle downward
(in the direction of the arrow), and pull it out slightly.
Step 2:
After removing the battery cover, install the battery.
Please pay attention to the installation position as
shown in the picture on the right and install it correctly.
Step 3:
Gently replace the battery cover into the electronic
watch in the direction shown on the right, and push
it inwards to complete the installation.
13