Instruction Of Monitor; App Setup Instruction - Merach Mr-R28 Benutzerhandbuch

INSTRUCTIONS OF MONITOR
INSTRUCTIONS OF MONITOR
FUNCTIONAL BUTTONS:
MODE- Push down for selecting functions.
If the long time holds down MODE
button down for resetting time, count
and calories.
FUNCTION AND OPERATIONS:
1. SCAN:
Press"MODE" button until "SCAN" appears,
monitor will rotate through all the 5 functions
2.TIME:
Count the total time from exercise start to end.
3. CNT:
Accumulate the steps while exercising.
4.T - CNT:
The current status of the traveled distance is displayed.
5. DIS T:
Count the total calories from exercise start to end.
6. CAL:
Display the steps you have exercised.
NOTE：
If the display is faint or shows no figures ,please replace the batteries.
The monitor will automatically shut off if there is no signal received after 4 minutes .
The monitor will be auto-powered on when starting to exercise push button w/signal in.
The monitor will automatically start calculating when you start to exercise and will stop
calculating when you stop exercising for 4 seconds .
SPECIFICATIONS:
FUNCTION
12
BATTERY TYPE
OPERATING TEMPERATURE
STORAGE TEMPERATURE
AUTO SCAN
TIME
COUNT
T.COUNT
CALORIES
DIST
Every 6 seconds
00:00'~99:59'
0-9999
0-9999
0.0~999.9Kcal
0-99.99
2pcs of SIZE –AAA or UM –4
0°C ~ +40°C
-10°C ~ +60°C